1. Market Research
  2. > Construction
  3. > Building Products Market Trends
  4. > Research and Development Trend Forecast on China Aluminum Alloy Automotive Body Sheet Market, 2014

Please note: The report is Chinese version. It will provide the English version in two business days.

In 2013, the production capacity of global aluminum alloy automotive body sheets (excluding lorry, trailer, semitrailer, van vehicles and special vehicles) achieved 850 thousand tons/year, the output was approximately 500 thousand tons, of which about 70% were produced by Novelis, Alcoa and Hydro, and the rest was for Japanese companies or other companies. The producers are captains of aluminum industry in developed countries, such as USA, Germany, Japan, France and South Korea.

China aluminum alloy automotive body sheet market started late. Under the limitations of capital, technology and equipment, currently the aluminum alloy sheets for automobile produced by China are mainly applied in automobile hubs, car doors, engines and other parts, so vacancy in aluminum alloy automotive body sheet market still waits to be filled. According to the statistics, in 2013, the production capacity of aluminum alloy automotive sheet in China was 65 thousand tons and the output was very small. Southwest Aluminum (Group) has developed and trial-produced aluminum alloy automotive body sheet in 2009, but it has not realized large batch production yet. As one of major aluminum alloy automotive sheet manufacturers in China, Xuzhou Caifa Aluminum Heat Transfer Co., Ltd cooperated with China Automotive Engineering Research Institute Co., Ltd and China University of Mining and Technology in 2010, which have successfully developed 6000 series aluminum alloys for automobile body sheets. Through making improvement for years, Xuzhou Caifa has invested more than CNY 100 million, forming the annual output of 10 thousand tons of aluminum alloy automotive body sheets. Jiangsu Sanyuan Aluminum Industry Co., Ltd has invested CNY 630 million in constructing the project with the annual output of 50 thousand tons of aluminum alloy automotive body sheets, and the products are used as automotive covering parts to replace steel plates.

Although China is a late starter in this field, with the acceleration of automobile weight reduction, it is predicted that more automobiles will use aluminum alloy plates to produce covering parts (engine hood, trunk lid, roof panel, wheel fender and car door) from 2014 to 2020. The demand for automotive aluminum plates will exceed 300 thousand tons as of 2020, of which the demand volume for aluminum alloy automotive body sheets will be around 180 thousand tons.

Table Of Contents

Research and Development Trend Forecast on China Aluminum Alloy Automotive Body Sheet Market, 2014
1. Development Overview of Aluminum Alloy Automotive Body Sheet Industry
1.1 Overview of Aluminum Alloy Automotive Sheet Industry
1.1.1 Concept
1.1.2 Product Features
1.2 Application of Aluminum Alloy Automotive Body Sheet

2. Development Overview of Global Aluminum Alloy Automotive Body Sheet
2.1 Development Status
2.1.1 Global Production Capacity
2.1.2 Global Consumption Regions
2.2 Major Countries
2.2.1 USA
2.2.2 Germany
2.2.3 Japan

3. Environment Analysis of China Aluminum Alloy Automotive Body Sheet
3.1 China's Macro Economy Development Environment
3.2 Development Policy Environment
3.2.1 Specialized 12th Five-Year Plan for Aluminum Industry
3.2.2 Standards for Aluminum Alloy Automotive Body Sheet
3.3 Technical Environment of Aluminum Alloy Automotive Body Sheet in China

4. Development Overview of China Aluminum Alloy Automotive Body Sheet Market
4.1 Development Status
4.2 Demand Analysis
4.2.1 Product Structure Analysis
4.2.2 Consumption Regions in China
4.3 Existing Problems

5. Import and Export of Aluminum Alloy Automotive Body Sheet
5.1 Import and Export of Aluminum Alloy Rectangular Plate and Sheet (0.35MM? thickness? 4MM), 2011-2013
5.1.1 Import-Export Data of Aluminum Alloy Rectangular Plate and Sheet (0.35MM? thickness? 4MM)
5.1.2 Import Sources and Export Destinations in 2013
5.2 Import and Export of Aluminum Alloy Plate, Sheet and Strip (thickness ? 0.2MM)? 2011-2013
5.2.1 Import-Export Data of Aluminum Alloy Pate, Sheet and Strip (thickness ? 0.2MM)
5.2.2 Import Sources and Export Destinations in 2013

6. Upstream and Downstream Analysis of Aluminum Alloy Automotive Body Sheet
6.1 Primary Aluminum Market
6.1.1 Output
6.1.2 Price Trend in 2013
6.2 Automobile Market
6.2.1 Review of Automobile Market in 2013
6.2.2 Forecast on Market Trend in 2014

7. Key Enterprises in China Aluminum Alloy Automotive Body Sheet Industry
7.1 Weifang Sanyuan Aluminum Industry Co., Ltd.
7.1.1 Company Profile
7.1.2 Main Business
7.1.3 Automotive Aluminum Sheet
7.2 Northeast Light Alloy Co., Ltd.
7.2.1 Company Profile
7.2.2 Main Business
7.2.3 Aluminum Alloy Automotive Body Sheet
7.2.4 Competitive Edge
7.2.5 Future Development Strategy
7.3 Jiangsu CAIFA Aluminum Co., Ltd.
7.3.1 Company Profile
7.3.2 Aluminum Alloy Automotive Body Sheet
7.4 Southwest Aluminum (Group) Co., Ltd.
7.4.1 Company Profile
7.4.2 Main Business
7.4.3 Aluminum Alloy Automotive Body Sheet
7.5 Jiangsu ALCHA Aluminum Co., Ltd.
7.5.1 Company Profile
7.5.2 Main Business
7.5.3 Competitive Edge
7.5.4 Business Performance

8. Investment in Aluminum Alloy Automotive Body Sheet Industry and Development Trend
8.1 Investment Opportunities
8.2 Investment Risks
8.2.1 Raw Materials Risk
8.2.2 Funding Risk
8.3 Development Trend
8.4 Development Suggestions
8.4.1 Establishing Institutions for Jointly Developing Automobile Aluminum Materials
8.4.2 Developing New Alloys and New Technologies
8.4.3 Perfecting Production Lines
8.4.4 Improving Cost Performance


Companies Mentioned

Weifang Sanyuan Aluminum Industry Co., Ltd.
Northeast Light Alloy Co., Ltd.
Jiangsu CAIFA Aluminum Co., Ltd.
Southwest Aluminum (Group) Co., Ltd.
Jiangsu ALCHA Aluminum Co., Ltd.

View This Report »

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 24 Million searchable statistics with tables, figures & datasets
  • More than 10,000 trusted sources
24/7 Customer Support

Talk to Veronica

+1 718 514 2762

Purchase Reports From Reputable Market Research Publishers
Aluminium Foil Markets in the World to 2020 - Market Size, Development, and Forecasts

Aluminium Foil Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global aluminium foil industry is forecast to reach 5.9% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 8.2%. Currently, backed ...

Aluminium Wire Markets in the World to 2020 - Market Size, Development, and Forecasts

Aluminium Wire Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global aluminium wire industry is forecast to reach 1.8% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 1.8%. Currently, aluminium ...

Aluminium Sheet and Plate Markets in the World to 2020 - Market Size, Development, and Forecasts

Aluminium Sheet and Plate Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global aluminium sheet and plate industry is forecast to reach 4.7% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 6.5%. Currently, ...


ref:plp2014

Reportlinker.com © Copyright 2016. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.