1. Market Research
  2. > Materials
  3. > Metals Market Trends
  4. > Lightweight Materials Market by Type (Composites, Metals, Plastics), Application (Automotive, Aviation, Marine, Wind Energy) - Global Trends & Forecast to 2019

The lightweight materials market is expected to grow exponentially in the next five years. Different governments across the world have been strenghtenig regulations for reduction of vehicular pollution. Lightweighting of vehicles enhances fuel efficiency. Hence, the lightweight materials market is set to witness high growth.

The report analyzes the global lightweight materials market trends and forecasts till 2019. The market size estimations have been provided in terms of market volume (KT) and value ($million). The report also identifies major manufacturers of lightweight materials and provides analysis for each player in terms of company overview, financials, products and services offered and recent developments.

The global lightweight materials market is expected to grow at a CAGR of 8.5% from 2014 to 2019 and will reach a value of $133.1 billion. The lightweight materials market has been segmented by type into composites, metals, and plastics, which have been further sub segmented. The market for lightweight metals is growing at a high rate followed by the plastics market. The demand has increased from vehicle manufacturers for lighter metals such as high strength steel and aluminum to substitute conventional materials without compromising the quality of the vehicles.

The high cost of certain lightweight materials such as of carbon fiber reinforced plasctic acts as a constraint for its increased utilization for replacement of other materials. In spite of the cost, the market for composites is expected to grow at a CAGR of 6.6% in terms of volume by 2019. The demand is driven due to the high strength and rigidity of this material that helps to ensure higher or same level of safety as provided by conventional consumed materials for manufacturing of vehicles and air planes.

Table Of Contents

Lightweight Materials Market by Type (Composites, Metals, Plastics), Application (Automotive, Aviation, Marine, Wind Energy) - Global Trends and Forecast to 2019
1 INTRODUCTION 31-45

1.1 OBJECTIVES OF THE REPORT
1.2 REPORT DESCRIPTION
1.3 MARKET AT A GLANCE
1.3.1 LIGHTWEIGHT MATERIALS, BY TYPE
1.3.2 LIGHTWEIGHT MATERIALS, BY APPLICATION
1.3.3 LIGHTWEIGHT MATERIALS, BY REGION
1.4 STAKEHOLDERS
1.5 RESEARCH METHODOLOGY and ASSUMPTIONS
1.5.1 KEY DATA POINTS TAKEN AWAY FROM SECONDARY SOURCES
1.5.2 KEY DATA POINTS TAKEN AWAY FROM PRIMARY SOURCES

2 EXECUTIVE SUMMARY 46-48

2.1 INTRODUCTION
2.2 INDUSTRY SNAPSHOT

3 PREMIUM INSIGTHS 49-53

3.1 LIGHTWEIGHT MATERIALS MARKET SHARE, BY TYPE and APPLICATION
3.2 LIGHTWEIGHT MATERIALS MARKET ATTRACTIVENESS, BY TYPE
3.3 LIGHTWEIGHT MATERIALS MARKET ATTRACTIVENESS, BY APPLICATION
3.4 LIGHTWEIGHT MATERIALS MARKET SHARE, BY REGION

4 MARKET OVERVIEW 54-70

4.1 INTRODUCTION
4.2 VALUE CHAIN ANALYSIS
4.2.1 COMPOSITES
4.2.2 METALS
4.2.3 PLASTICS
4.3 MARKET DYNAMICS
4.3.1 DRIVERS
4.3.1.1 Increasing stringency of regulations on vehicular emissions and fuel efficiency
4.3.1.2 Growing demand coupled with material innovations in aviation industry
4.3.2 RESTRAINTS
4.3.2.1 Safety and technological constraints
4.3.2.2 High cost of lightweight materials
4.3.3 OPPURTUNITIES
4.3.3.1 Upcoming regulations in emerging countries
4.3.3.2 Commercialization of electric vehicles
4.3.3.3 Growing demand in wind energy sector
4.4 PORTER'S FIVE FORCES ANALYSIS

5 MARKET ASSESSMENT, BY TYPE 71-94

5.1 INTRODUCTION
5.2 MARKET SIZE and PROJECTION
5.2.1 LIGHT METALS TO HAVE THE HIGHEST GROWTH
5.3 COMPOSITES
5.3.1 COMPOSITE MATERIALS TO HAVE HIGHEST CONSUMPTION IN NORTH AMERICA
5.3.2 COMPOSITE TYPE, BY COUNTRY
5.3.3 CARBON FIBER REINFORCED PLASTIC
5.3.4 GLASS FIBER REINFORCED PLASTIC
5.4 METALS
5.4.1 ASIA-PACIFIC TO GENERATE HIGHEST REVENUE FOR LIGHT METALS
5.4.2 METALS TYPE, BY COUNTRY
5.4.3 ALUMINUM
5.4.4 HIGH STRENGTH STEEL
5.4.5 MAGNESIUM
5.4.6 TITANIUM
5.5 PLASTICS
5.5.1 LIGHTWEIGHT PLASTICS SET TO HAVE INCREASED DEMAND IN ASIA-PACIFIC
5.5.2 PLASTICS TYPE, BY COUNTRY
5.5.3 POLYCARBONATE
5.5.4 POLYPROPYLENE

6 MARKET ANALYSIS, BY APPLICATION 95-109

6.1 INTRODUCTION
6.2 MARKET SIZE and PROJECTION
6.2.1 LIGHTWEIGHT MATERIALS TO HAVE HIGHEST CONSUMPTION IN AUTOMOTIVE SECTOR
6.3 AUTOMOTIVE
6.3.1 CONSUMPTION OF LIGHTWEIGHT MATERIALS BY AUTOMOTIVE INDUSTRY IN ASIA-PACIFIC TO GROW AT HIGHEST RATE
6.4 AVIATION
6.4.1 NORTH AMERICA TO DRIVE GROWTH OF LIGHTWEIGHT MATERIALS IN AVIATION
6.5 MARINE
6.5.1 MARINE INDUSTRY IN ASIA-PACIFIC TO UTILIZE MORE LIGHTWEIGHT MATERIALS
6.6 WIND ENERGY
6.6.1 GROWING WIND ENERGY SECTOR IN ASIA-PACIFIC TO FUEL CONSUMPTION OF LIGHTWEIGHT MATERIALS

7 MARKET ANALYSIS, BY GEOGRAPHY 110-179

7.1 INTRODUCTION
7.2 MARKET SIZE and PROJECTION
7.3 ASIA-PACIFIC: LIGHTWEIGHT MATERIALS MARKET ANALYSIS
7.3.1 CHINA
7.3.1.1 Growing automotive industry to contribute to growth
7.3.1.2 UPCOMING CHINA VI REGULATIONS: MARKET OPPURTUNITY
7.3.1.3 INCREASING CAPACITY OF WIND ENERGY
7.3.1.4 China: Lightweight Materials Market, By Type
7.3.1.5 China: Lightweight Materials Market, By Application
7.3.2 INDIA
7.3.2.1 India: Lightweight Materials Market, By Type
7.3.2.2 India: Lightweight Materials Market, By Application
7.3.3 JAPAN
7.3.3.1 Japan: Lightweight Materials Market, By Type
7.3.3.2 Japan: Lightweight Materials Market, By Application
7.3.4 SOUTH KOREA
7.3.4.1 South Korea: Lightweight Materials Market, By Type
7.3.4.2 South Korea: Lightweight Materials Market, By Application
7.4 EUROPE: LIGHTWEIGHT MATERIALS MARKET ANALYSIS
7.4.1 France
7.4.1.1 France: Lightweight Materials Market, By Type
7.4.1.2 France: Lightweight Materials Market, By Application
7.4.2 GERMANY
7.4.2.1 Germany: Lightweight Materials Market, By Type
7.4.2.2 Germany: Lightweight Materials Market, By Application
7.4.3 ITALY
7.4.3.1 Italy: Lightweight Materials Market, By Type
7.4.3.2 Italy: Lightweight Materials Market, By Application
7.4.4 U.K.
7.4.4.1 U.K.: Lightweight Materials Market, By Type
7.4.4.2 U.K.: Lightweight Materials Market, By Application
7.4.5 REST OF EUROPE
7.4.5.1 Rest of Europe: Lightweight Materials Market, By Type
7.4.5.2 Rest of Europe: Lightweight Materials Market, By Application
7.5 NORTH AMERICA: LIGHTWEIGHT MATERIALS MARKET ANALYSIS
7.5.1 U.S.
7.5.1.1 LARGER CAR SIZE TO BOOST ALUMINUM USAGE FOR LIGHT WEIGHTING
7.5.1.2 AIRCRAFT OEMs PRODUCTION FACILITIES TO BOOST THE MARKET IN AVIATION SECTOR
7.5.1.3 CAFE STANDARDS TO DRIVE LIGHTWEIGHT MATERIALS MARKET IN AUTOMOTIVE
7.5.1.4 U.S.: Lightweight Materials Market, By Type
7.5.1.5 U.S.: Lightweight Materials Market, By Application
7.5.2 CANADA
7.5.2.1 Canada: Lightweight Materials Market, By Type
7.5.2.2 Canada: Lightweight Materials Market, By Application
7.5.3 MEXICO
7.5.3.1 Mexico: Lightweight Materials Market, By Type
7.5.3.2 Mexico: Lightweight Materials Market, By Application
7.6 ROW: LIGHTWEIGHT MATERIALS MARKET ANALYSIS
7.6.1 BRAZIL
7.6.1.1 Brazil: Lightweight Materials Market, By Type
7.6.1.2 Brazil: Lightweight Materials Market, By Application
7.6.2 THE MIDDLE EAST and AFRICA
7.6.2.1 The Middle East and Africa: Lightweight Materials Market, By Type
7.6.2.2 The Middle East and Africa: Lightweight Materials Market, By Application

8 COMPETITIVE LANDSCAPE 180-191

8.1 STRATEGIC DEVELOPMENTS
8.1.1 MAXIMUM NUMBER OF DEVELOPMENTS IN 2011
8.1.2 NORTH AMERICA: THE HIGHEST NUMBER OF DEVELOPMENTS
8.2 EXPANSIONS
8.3 CONTRACTS and AGREEMENTS
8.4 NEW PRODUCT LAUNCHES

9 COMPANY PROFILES 192-252

9.1 ARCELORMITTAL S.A.
9.2 ALCOA INC.
9.3 SAUDI BASIC INDUSTRIES CORPORATION
9.4 PPG INDUSTRIES, INC.
9.5 TORAY INDUSTRIES, INC.
9.6 DEAD SEA MAGNESIUM LTD.
9.7 HEXCEL CORPORATION
9.8 NOVELIS INC.
9.9 OWENS CORNING
9.10 STYRON LLC
9.11 THYSSENKRUPP AG
9.12 TITANIUM METALS CORPORATION
9.13 U.S. MAGNESIUM LLC
9.14 VSMPO-AVISMA CORPORATION

LIST OF TABLES

1 Research Methodology: Assumptions 43
2 Industry Snapshot 48
3 Impact Of Drivers, Restraint and Opportunities, By Timeline 59
4 Key Countries: Impact of Regulations on Lightweight Materials Market 61
5 Lightweight Materials Market Size, By Type, 2012-2019 (KT) 75
6 Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 76
7 Composites Market Size, By Region, 2012-2019 (KT) 78
8 Composites Market Size, By Region, 2012-2019 ($Million) 78
9 CFRP Market Size, By Region, 2012-2019 (KT) 80
10 CFRP Market Size, By Region, 2012-2019 ($Million) 80
11 GFRP Market Size, By Type, 2012-2019 (KT) 81
12 GFRP Market Size, By Type, 2012-2019 ($Million) 81
13 Metals Market Size, By Region, 2012-2019 (KT) 83
14 Metals Market Size, By Region, 2012-2019 ($Million) 83
15 Aluminum Market Size, By Region, 2012-2019 (KT) 86
16 Aluminum, Market Size, By Region, 2012-2019 ($Million) 86
17 High Strength Steel Market Size, By Region, 2012-2019 (KT) 87
18 High Strength Steel Market Size, By Region, 2012-2019 ($Million) 87
19 Magnesium Market Size, By Region, 2012-2019 (KT) 88
20 Magnesium Market Size, By Region, 2012-2019 ($Million) 88
21 Titanium Market Size, By Region, 2012-2019 (KT) 89
22 Titanium Market Size, By Region, 2012-2019 ($Million) 89
23 Plastics Market Size, By Region, 2012-2019 (KT) 91
24 Plastics Market Size, By Region, 2012-2019 ($Million) 91
25 Polycarbonate Market Size, By Region, 2012-2019 (KT) 93
26 Polycarbonate Market Size, By Region, 2012-2019 ($Million) 93
27 Polypropylene Market Size, By Region, 2012-2019 (KT) 94
28 Polypropylene Market Size, By Region, 2012-2019 ($Million) 94
29 Lightweight Materials Market Size, By Application, 2012-2019 (KT) 99
30 Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 99
31 Lightweight Materials Market Size in Automotive, By Region, 2012-2019 (KT) 101
32 Lightweight Materials Market Size in Automotive, By, 2012-2019 ($Million) 102
33 Lightweight Materials in Aviation Market Size, By, 2012-2019 (KT) 104
34 Lightweight Materials Market Size in Aviation, By, 2012-2019 ($Million) 105
35 Lightweight Materials in Marine Market Size, By, 2012-2019 (KT) 107
36 Lightweight Materials in Marine Market Size, By, 2012-2019 ($Million) 107
37 Lightweight Materials in Wind Energy Market Size, By Region, 2012-2019 (KT) 109
38 Lightweight Materials in Wind Energy Market Size, By Region, 2012-2019 ($Million) 109
39 Lightweight Materials Market Size, By Geography, 2012-2019 (KT) 113
40 Lightweight Materials Market Size, By Geography, 2012-2019 ($Million) 113
41 Asia-Pacific: Lightweight Materials Market Size, By Country, 2012-2019 (KT) 115
42 Asia-Pacific: Lightweight Materials Market Size, By Country, 2012-2019 ($Million) 115
43 Asia-Pacific: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 116
44 Asia-Pacific: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 117
45 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 118
46 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 118
47 China: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 121
48 China: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 122
49 China: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 123
50 China: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 123
51 India: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 124
52 India: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 125
53 India: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 126
54 India: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 126
55 Japan: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 127
56 Japan: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 128
57 Japan: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 129
58 Japan: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 129
59 South Korea: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 130
60 South Korea: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 131
61 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 132
62 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 132
63 Europe: Lightweight Materials Market Size, By Country, 2012-2019 (KT) 134
64 Europe: Lightweight Materials Market Size, By Country, 2012-2019 ($Million) 134
65 Europe: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 135
66 Europe: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 136
67 Europe: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 137
68 Europe: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 137
69 France: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 138
70 France: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 139
71 France: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 140
72 France: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 140
73 Germany: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 141
74 Germany: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 142
75 Germany: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 143
76 Germany: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 143
77 Italy: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 144
78 Italy: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 145
79 Italy: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 146
80 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 146
81 U.K.: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 147
82 U.K.: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 148
83 U.K.: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 149
84 U.K.: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 149
85 Rest of Europe: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 150
86 Rest of Europe: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 151
87 Rest of Europe: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 152
88 Rest of Europe: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 152
89 North America: Lightweight Materials Market Size, By Country, 2012-2019 (KT) 189
90 Asia-Pacific: Lightweight Materials Market Size, By Country, 2012-2019 ($Million) 154
91 North America: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 155
92 North America: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 156
93 North America: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 157
94 North America: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 157
95 U.S.: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 160
96 U.S.: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 161
97 U.S.: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 162
98 U.S.: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 162
99 Canada: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 163
100 Canada: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 164
101 Canada: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 165
102 Asia-Pacific: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 165
103 Mexico: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 166
104 Mexico: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 167
105 Mexico: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 168
106 Mexico: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 168
107 Mexico: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 170
108 RoW: Lightweight Materials Market Size, By Country, 2012-2019 ($Million) 170
109 RoW: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 171
110 RoW: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 172
111 RoW: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 173
112 Rest of the World: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 173
113 Brazil: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 174
114 Brazil: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 175
115 Brazil: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 176
116 Brazil: Lightweight Materials Market Size, By Application, 2012-2019 ($Million) 176
117 The Middle East and Africa: Lightweight Materials Market Size, By Type, 2012-2019 (KT) 177
118 The Middle East and Africa: Lightweight Materials Market Size, By Type, 2012-2019 ($Million) 178
119 The Middle East and Africa: Lightweight Materials Market Size, By Application, 2012-2019 (KT) 179
120 Middle East and Africa: Lightweight Materials Market Size, By Country, 2012-2019 ($Million) 179
121 Expansions, 2014* 187
122 Contracts and Agreements, 2013-2014* 189
123 New Product Launches, 2013-2014* 191

LIST OF FIGURES

1 Lightweight Materials Market Segmentation 34
2 Lightweight Materials Market Segmentation, By Type 35
3 Lightweight Materials Market Segmentation, By Application 36
4 Lightweight Materials Market Segmentation, By Region 37
5 Research Methodology 39
6 Research Methodology: Demand Side 40
7 Research Methodology: Supply Side 41
8 Research Methodology: Triangulation 42
9 Data from Secondary Sources 44
10 Data from Primary Sources 45
11 Lightweight Materials Market Share (Value), By Type and Application, 2013 50
12 Lightweight Materials Market Share (Value), By Type, 2013 51
13 Lightweight Materials Market Share (Value), By Type and Application, 2013 52
14 Lightweight Materials Market Share (Value), By Region, 2012 - 2019 53
15 Composites: Value Chain Analysis 56
16 Metals: Value Chain Analysis 57
17 Plastics: Value Chain Analysis 58
18 Brent Crude Oil Price Trend (2000-2013) 62
19 WTI Crude Oil Price Trend (2000-2013) 62
20 Civil Aircrafts: Composites Usage Trends, By Timeline 64
21 Global Wind Energy: Cumulative Capacity Forecast (1997-2020) 69
22 Porter's Five Forces Analysis 70
23 Lightweight Materials Market Segmentation, By Type 73
24 Lightweight Materials Market Share (Volume), By Type, 2013 74
25 Composites Market Share (Volume), By Type, 2014-2019 77
26 CFRP Market Share (Value), By Country, 2013 79
27 GFRP Market Share (Value), By Country, 2013 79
28 Metals Market Share, By Type, 2013 (Volume) 82
29 Aluminum Market Share (Value), By Country, 2013 84
30 HSS Market Share (Value), By Country, 2013 84
31 Magnesium Market Share (Value), By Country, 2013 85
32 Titanium Market Share (Value), By Country, 2013 85
33 Composites Market Volume Segmentation, By Type, 2014-2019 90
34 PC Market Share (Value), By Country, 2013 92
35 PP Market Share (Value), By Country, 2013 92
36 Lightweight Materials Market Segmentation, By Application 97
37 Lightweight Materials Market Share (Value), By Application, 2013 98
38 Lightweight Materials Market Size in Automotive, 2012-2019 (Volume) 100
39 Lightweight Materials Market Share (Volume) in Aviation, By Region, 2014-2019 103
40 Lightweight Materials Market Share (Volume) in Marine, By Region, 2013 106
41 Lightweight Materials Market Share (Volume) in Wind Energy, By Region, 2012-2019 108
42 Lightweight Materials Market Share (Volume), By Country, 2013 112
43 Asia-Pacific: Lightweight Materials Market Share (Value), By Country, 2014 - 2019 114
44 China: Motor Vehicle Production Trends, 2004-2013 119
45 Lightweight Materials Market Share (Value), 2012-2019 133
46 Lightweight Materials Market Share (Volume), By Country, 2013 153
47 U.S.: PASSENGER CAR PRODUCTION TRENDS, 2012-2019 158
48 RoW: Lightweight Materials Market Size, By Country, 2012 - 2019 (Volume) 169
49 Lightweight Materials Market Development Share, By Strategy, 2010-2014* 182
50 Lightweight Materials Market Development Analysis, By Company, 2010-2014* 183
51 Lightweight Materials Market Development Trend, 2010-2014* 184
52 Lightweight Materials Market Development Share, By Region, 2010-2014* 185
53 Lightweight Materials Market Expansion Analysis, By Region, 2010-2014* 186
54 Lightweight Materials Market, Contract and Agreement Analysis, By Region, 2010-2014* 188
55 Lightweight Materials Market, New Product Launches Analysis, By Region, 2010-2014* 190

View This Report »

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 24 Million searchable statistics with tables, figures & datasets
  • More than 10,000 trusted sources
24/7 Customer Support

Talk to Veronica

+1 718 514 2762

Purchase Reports From Reputable Market Research Publishers
Orthodontic Supplies Market by Removable & Fixed Braces (Brackets (Self Ligating, Lingual, Metal, Ceramic, Aesthetic), Archwire (Nickel Titanium, Stainless Steel), Ligature (Elastomeric, Wire), Anchorage Appliances, Adhesives), Patient - Forecast to 2021

Orthodontic Supplies Market by Removable & Fixed Braces (Brackets (Self Ligating, Lingual, Metal, Ceramic, Aesthetic), Archwire (Nickel Titanium, Stainless Steel), Ligature (Elastomeric, Wire), Anchorage Appliances, Adhesives), Patient - Forecast to 2021

  • $ 5650
  • Industry report
  • October 2016
  • by MarketsandMarkets

The global orthodontic supplies market is estimated to grow at a CAGR of 8.0% from 2016 to 2021 to reach USD 4.71 billion by 2021. Although the developed regions (such as North America and Europe) are ...

Global Metal Caps and Closures Market - Trends and Forecasts (2016 - 2021)

Global Metal Caps and Closures Market - Trends and Forecasts (2016 - 2021)

  • $ 4250
  • Industry report
  • August 2016
  • by Mordor Intelligence LLP

Carbonated soft drinks industry leads the market followed by beer and wine industry, however, the market is losing out sales to plastic caps and closures, which have become an alternative for metal packaging. ...

Global and Chinese High Pure Manganese Metal Industry, 2016 Market Research Report

Global and Chinese High Pure Manganese Metal Industry, 2016 Market Research Report

  • $ 3000
  • Industry report
  • November 2016
  • by Prof Research

The ’Global and Chinese High Pure Manganese Metal Industry, 2011-2021 Market Research Report’ is a professional and in-depth study on the current state of the global High Pure Manganese Metal industry ...


ref:plp2014

Reportlinker.com © Copyright 2016. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.