1. Market Research
  2. > Materials
  3. > Metals Market Trends
  4. > Russian Steel and Rolled Steel Production, Market (1998-2013) and Forecast (until 2020) - 11 edition

This report is available both in Russian and English versions

The report is devoted to investigation of current state of the Russian market of steel and forecast of its development in the coming years. The report consists of 12 Sections, 852 pages, including 136 tables, 55 figures.

The first section describes the general characteristics of Russia's steel industry. It is divided into 12 chapters.

The first chapter describes the economic situation in the industry after the crisis. The chapter shows the financial performance of major metallurgical enterprises of the sector in 2007-2012.
The second chapter presents an analysis of production from 1970 to 2012 and the first half of 2013 and the use of existing facilities.
The third chapter is devoted to a brief description of the main Russian producers of steel and rolled products. Bring their data to produce the main product from 1993 to 2013.
The fourth chapter describes the situation with the raw material for production of steel (iron ore and pellets, pig iron, scrap, direct reduced iron and hot briquetted iron-). For all types of raw data are given for its production in the 1993-2012 years. and the first half of 2013, broken down by company-producers, the dynamics of internal and external supply in 1995-2012, the dynamics of average domestic prices of primary producers in 2002-2012 and the first half of 2013, as well as the dynamics of export prices.
The fifth chapter is devoted to the problems of restructuring Russia's steel industry. It describes the main government program for the strategy development of metallurgical industry of Russia in 2020, data on investment projects implemented in various enterprises of the industry.
The sixth chapter gives the main results of privatization in the Russian steel industry.
The seventh chapter is devoted to the export markets of the Russian metallurgical enterprises. Data are presented on Russian exports and imports in 1998-2012 years. main products (billets, wire rods, bars, fittings, profiles, hot-rolled sheet, cold rolled sheet proc, coated sheets).
The eighth chapter provides an analysis of the domestic consumption of finished steel in Russia, given its speaker from 1998 to 2012. by type of hire. A separate analysis of consumption of finished steel in the major consuming industries of Russia - engineering, construction, pipe industry.
The ninth chapter provides a detailed analysis of the supply of steel in 2007-2012, exact data for three years for the consumption of steel enterprises with consumption of more than 50 thousand tons per year. Shows the regional pattern of consumption of finished steel by regions of Russia.
In the tenth chapter lists the key factors influencing the pricing of steel products in Russia (electricity, conventional fuel rail).
In the eleventh chapter provides an analysis of internal and external prices of major steel products in 2005-2012 and the first half of 2011 on 3a monthly basis.
In the twelfth and final chapter of the first section presents a forecast of production and consumption of steel and rolled steel in Russia in 2020

The second section of the report is devoted to a detailed description of the nine major steel Russia - Severstal, MMK, NLMK, MMK, OEMK, Ural Steel, NTMK, ZSMK and NKMK.

For each plant is given a brief historical background, the enterprise, capacities, range of products, data on its production from 1997 through 2012, the main trends of the company, sources and suppliers of raw materials, organization of marketing, both domestic as well as on foreign markets, export data in 1998-2012 years. by country and by product, evaluation of the competitiveness of products in different markets, data on personnel and labor productivity, a description of environmental protection, privatization of the history, structure, its shareholders and owners, the financial position in recent years, a description of completed projects and software development company. Attached to each company is given a description of main equipment and its characteristics, the enlarged range of products and their characteristics, the export of rolled steel plant in the last 10 years, broken down by country.

This work is a "desk" research. As information sources used data of Rosstat, Federal Customs Service of Russia, official statistics domestic railage. Also, data of sectoral and regional press, annual and quarterly repots of companies, web-sites of company, as well as information database companies, the database of "InfoMine".

Table Of Contents

Russian Steel and Rolled Steel Production, Market (1998-2013) and Forecast (until 2020) - 11 edition
Part I. Standing of Ferrous Metallurgy of the Russian Federation

Introduction
I.1 Economic standing of Russian ferrous metallurgy
I.2. Analysis of production and capacities utilization (1998-2012)
I.3. The main Russian steelmaking enterprises
I.4. Raw materials for steelmaking
Iron ore resources
Iron
Scrap
Other kinds of raw materials (DRI/HBI)
I.5. Restructuring of Russian ferrous metallurgy
I.6. Results of privatization in Russian ferrous metallurgy3
I.7. Export-Import of rolled Steel (1998-2012), Key Export Markets for Russian Steel
Semis
Long-rolled products
Flat-rolled products
I.8. Russian domestic consumption of rolled steel (1998-2012, basic end-uses)
Machine building
Civil engineering
Pipe sector
I.9. Analysis of domestic rolled steel supplies in Russia in 2007-2012
I.10. Pricing in Russian steel sector
I.11. Analysis of prices on steel and rolled steel
I.12. Forecast of Russian production and consumption of steel
?

Part II. Standing Main Russian Steelmaking Enterprises

II.1. JSC Severstal
II.1.1 General information
II.1.2 The enterprise structure, capacities, range of products
II.1.3 Production, tendencies of development
II.1.4 Sources and suppliers of raw materials
II.1.5 Domestic Market
Fuel and Power Complex (TEK)
Motor industry
Heavy machine building
Metalware industry
Ship-building industry
Building and Steel Trade (Distribution)
II.1.6 Exports
II.1.7 Financial Standing
II.1.8 Competitiveness, production effectiveness
II.1.9 Realized Projects
Sintering plants
Coal-tar chemical plants (Coking facilities)
Blast Furnace Plant
Drop-hammer shop
Steelmaking Production
The converter plant
The electro-steelmaking plant
Rolling production
Roll-formed section shop. Pipe production
Joint venture CJSC Air Liquid Severstal (ALS)
II.1.10 Development Program
SeverGal joint venture
Izhory Pipe Plant
CJSC Severstal-TPZ Sheksna
CJSC Severstal-Balakovo Long Product Mill
II.1.11 Ecological Policy
II.1.12 Restructuring, pattern of ownership
II.1.13 Cost Pattern, Labor Productivity, Personnel, Social Responsibility
Appendix 1: Export of products, 2003-2012, tonnes, thousand USD
Semis
HR flat product
CR product
Galvanized sheet
Wire rod
Rod (rebar)
Angles and sections
Appendix 2: Mix of products of JSC Severstal
Appendix 3: Contact information

II.2 Jt.St.Co. MMK
II.2.1 General information
II.2.2 The enterprise structure, capacities, range of products
II.2.3 Production, tendencies of development
II.2.4 Sources and suppliers of raw materials
II.2.5 Domestic Market
Pipe/tube production
Motor works
Machine building
Metalware/metalworking industry
II.2.6 Exports
II.2.7 Competitiveness, Production Effectiveness
II.2.8 Financial Standing
II.2.9 Cost Pattern, Labor Productivity, Personnel, Social Obligations
II.2.10 Ecological Measures
II.2.11 Privatization, Pattern of Ownership
II.2.12 The Realized Projects
Mining-concentrating/sintering production (GOP)
Coal-tar chemical plant (Coking plant)
Blast furnace plant
Steelmaking production
Electro-steelmaking plant (former open-hearth plant)
Rolling production
Long-rolling production
Hot-rolling flat production
Cold-rolling flat production
Power-generating complex, oxygen shop
Construction of a Steel-Rolling Complex in Turkey
II.2.13 Program of Development
Appendix 1: Exports of MMK in 2003-2012
Semis (slabs and billet)
Hot-rolled flat steel
Cold-rolled steel
Galvanised flats and polymer-coated flats
Tinplate
Wire rod
Bar
Angle and sections
Appendix 2: Mix of products of JSC «MMK»
Semis
HR billet
Long products
HR flat products
CR flat products
Roll-formed sections
Electrowelded pipes with linear seam
Appendix 3: Contact information

II.3 Jt.St.Co. NLMK
II.3.1 General information
II.3.2 The enterprise structure, capacities, range of products
II.3.3 Production, Tendencies of Development
II.3.4 Sources and Suppliers of Raw Materials
Raw material
Iron ore concentrate
Pellets
II.3.5 Domestic Market
II.3.6 Exports
II.3.7 Competitiveness and Production Effectiveness
II.3.8 Pattern of Costs, Labor Productivity, Personnel, Social Responsibility
II.3.9 Natural Environment Protection
II.3.10 Privatization, pattern of ownership
II.3.11 Financial Standing
II.3.12 Development Programs
II.3.13 Realised Projects and Development Programs
Appendix 1: Export of products, 2003-2012, tons, kUSD
Slabs
HR flats
CR flats
CR narrow strip
Galvanised flats
Appendix 2: Mix of products of JSC NLMK
Semis
HR flat products
CR flat products
Appendix 3: Contact information

II.4 Jt.St.Co. ChMK (MECHEL)
II.4.1 General information
II.4.2 The enterprise structure, capacities, range of products
II.4.3 Production, tendencies of development
II.4.4 Sources and Suppliers of Raw Materials
II.4.5 Sales
II.4.5.1 Domestic Market
II.4.5.2 Exports
II.4.6 Competitiveness
II.4.7 Financial Standing
II.4.8 Environmental Program
II.4.9 Privatization, Pattern of Ownership
II.4.10 Cost Pattern, Labor Productivity, Personnel, Social Obligations
II.4.11 Program for Development and the Implemented Projects
Appendix 1: Exports by product in 2003-2012
Semis
Wire rod
Hot-rolled bar
Appendix 2: Mix of products of JSC «ChMK»
Appendix 3: Contact information

II.5 JSC OEMK
II.5.1 General information
II.5.2 The enterprise structure, range of products
II.5.3 Production, tendencies of development
II.5.4 Sources and suppliers of raw materials
II.5.5 Domestic market
II.5.6 Exports
II.5.7 Competitiveness
II.5.8 Financial standing, production effectiveness
II.5.9 Credits and preferences
II.5.10 Ecology
II.5.11 Privatization, pattern of ownership
II.5.12 Pattern of costs, labor productivity, personnel, social obligations
II.5.13 Realised Projects Investments and the program of OEMK development
II.5.14 Development Program
Appendix 1: Exports by product in 2003-2012
Carbon steel billet
Alloyed steel semis
Carbon bars
Alloyed steel bars
Appendix 2: Mix of products of JSC «OEMK»
Appendix 3: Contact information

II.6 JSC Ural Steel
II.6.1 General information
II.6.2 The enterprise structure, range of products
II.6.3 Production, tendencies of development
II.6.4 Sources and suppliers of raw materials
II.6.5 Sales, domestic market
II.6.6 Exports
II.6.7 Competitiveness
II.6.8 Pattern of Costs, Labor Productivity, Personnel, Social Responsibility
II.6.9 Financial Standing and Production Efficiency
II.6.10 Privatization, pattern of ownership
II.6.11 Realized Projects
II.6.12 Program of Development
II.6.13 Environmental Policy
Appendix 1: Exports in 2003-2012
Semis
Hot-rolled flat steel
Appendix 2: Mix of products of JSC «Ural Steel»
Iron
Semis
Hot-rolled semis
Long-rolled steel
Hot-rolled flat steel
Consumer goods
Appendix 3: Contact information

II.7 JSC Evraz NTMK
II.7.1 General information
II.7.2 The enterprise structure, capacities, range of products
II.7.3 Range of products, production and tendencies of development
II.7.4 Sources and suppliers of raw materials
II.7.5 Domestic market
II.7.6 Exports
II.7.7 Competitiveness
II.7.8 Financial standing, production effectiveness
II.7.9 Ecology
II.7.10 Privatization, pattern of ownership
II.7.11 Pattern of Costs, Labor Productivity, Personnel, Social Responsibility
II.7.12 Realised Projects
II.7.13 Development Plans
Appendix 1: Exports in 2003-2012
Semis
Long rolled steel - heavy sections
Appendix 2: Mix of products of JSC «NTMK»
Appendix 3: Contact information
?
II.8 JSC Evraz ZSMK
II.8.1 General Information
II.8.2 The enterprise structure, capacities, range of products
II.8.3 Production, tendencies of development
II.8.4 Sources and Suppliers of Raw Materials
II.8.5 Sales, Domestic Market
II.8.6 Exports
II.8.7 Competitiveness and Production Effectiveness
II.8.8 Financial Standing
II.8.9 Environmental Measures
II.8.10 Privatization and Pattern of Ownership
II.8.11 Pattern of Costs, Labor Productivity, Personnel, Social Obligations
II.8.12 Realised Projects
II.8.13 Program for Development
Appendix 1: Exports of ZSMK in 2003-2012
Semis
Wire rod
Bar
Heavy Sections
Appendix 2: Exports of NKMK in 2003-2012
Semis
HR flat product
Appendix 3: Mix of Products
Roughed semis
HR billet2
Long products
Hot-rolled flats
Pipes electro-welded
Appendix 4: Contact information

View This Report »

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 24 Million searchable statistics with tables, figures & datasets
  • More than 10,000 trusted sources
24/7 Customer Support

Talk to Ahmad

+1 718 618 4302

Purchase Reports From Reputable Market Research Publishers
Nickel Profile, Bar and Rod Markets in the World to 2020 - Market Size, Development, and Forecasts

Nickel Profile, Bar and Rod Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global nickel profile, bar and rod industry is forecast to reach 2.6% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 2.7%. Currently, ...

Copper Markets in the World to 2020 - Market Size, Development, and Forecasts

Copper Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global copper industry is forecast to reach 4.2% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 5.0%. Currently, copper sheets ...

Copper Sheet and Plate Markets in the World to 2020 - Market Size, Development, and Forecasts

Copper Sheet and Plate Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The report package Copper Sheet and Plate Markets in the World to 2020 - Market Size, Development, and Forecasts offers the most up-to-date industry data on the actual market situation, and future outlook ...


ref:plp2013

Reportlinker.com © Copyright 2016. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.