1. Market Research
  2. > Retail Market Trends
  3. > Maintenance and Aftermarket Preferences in Mining for Europe and the former Soviet Union, 2015

Maintenance and Aftermarket Preferences in Mining for Europe and the former Soviet Union, 2015

Summary

Overall trends in the data revealed -
- While OEMs dominate the supply of strategic parts with 60% choosing purely OEMs and 34% a mix of OEMs and third parties, third parties have a greater penetration of non-strategic parts. Availability of spare parts is a key weakness for OEMs, which provides third parties with an opportunity to gain further share unless the OEMs improve their supply infrastructure, logistics structure and performance.
- After-sales equipment support preferences show over half (55%) of respondents want regular input from their manufacturer, 24% prefer to outsource support work, and 21% prefer to keep work in-house.
- Service contract preference shows a direction for simpler structures with maintenance only (47%) favored ahead of operation and maintenance (30%), while life cycle management remains marginal across the region (18%).
- Opportunities for life cycle management services are greatest for the largest companies, and within the former Soviet Union.

Scope

- The report is based on responses from a survey of 100 senior managers at operating European and former Soviet Union mines, and provides detailed analysis of maintenance and aftermarket preferences. Survey respondents came from 23 different countries, including Sweden, Kazakhstan, Turkey, United Kingdom, Finland, Spain, Russia and the Ukraine. This included five different commodity groups and a range of surface and underground mining operations.

Reasons to buy

- Understand mining companies’ use of original equipment manufacturers (OEMs) or third parties for equipment parts and for processing equipment needs. Also how these preferences vary by commodity, company size and region.
- Gain knowledge of mining company preferences for after-sales support structure, and identify the services required based on mine type, company size and commodity.
- Understand the importance mining companies place on service and maintenance costs and capabilities. Then compare the results with the actual rated performance of these equipment manufacturers.
- Identify the service contract preferences of mines in Europe and the former Soviet Union, and compare across mine type, region and company size.

Table Of Contents

Maintenance and Aftermarket Preferences in Mining for Europe and the former Soviet Union, 2015
1 Table of Contents
1 Executive Summary
2 Aftermarket Preferences
2.1 Types of Company Used for Parts
2.2 Regional Comparison: Companies Used for Parts in Europe and the Former Soviet Union
2.3 Comparison by Region and Commodity for Western Europe, Scandinavia and the Former Soviet Union
2.4 A Summary of Opportunities for Suppliers
3 After-Sales Equipment Support Preferences
3.1 After-Sales Equipment Support Preferences by Company Size and Mine Type
3.2 After-Sales Equipment Support Preferences by Commodity
3.3 A Regional Comparison of After-Sales Equipment Support
3.4 A Regional Comparison of After-Sales Equipment Support by Company Size
3.5 Importance of After-Sales Support When Choosing an OEM
3.6 Opportunities for Suppliers of Aftermarket Services
4 Service Contract Preferences
4.1 Service Contract Preferences by Company Size
4.2 Service Contract Preferences by Region
4.3 Service Contract Preferences by Commodity
5 Conclusion
6 Appendix I
7 Appendix II
7.1 Survey Background
7.2 Analysis of the Survey Sample
7.3 Equipment Sourced from Main Suppliers
8 Appendix III
8.1 What is This Report About?
8.2 Methodology
8.3 Contact GlobalData
8.4 About GlobalData
8.5 Disclaimer

1.1 List of Tables
Table 1: Respondent Countries and Regions, 2014/15
Table 2: Types of Company Used for Parts by Category (%), 2014/15
Table 3: Use of Third Parties and Mix of OEMs/Third Parties by Company Size (%), 2014/15
Table 4: Use of Third Parties and Mix of OEMs/Third Parties by Commodity Group (%), 2014/15
Table 5: Use of Third Parties and Mix of OEMs/ Third Parties by Country (%), 2014/15
Table 6: After-Sales Equipment Support Preference (%), 2014/15
Table 7: Preferences for After-Sales Support by Region (%), 2014/15
Table 8: Preferences for After-Sales Support by Mine Type and Company Size (%), 2014/15
Table 9: Average Rating of Importance and Performance of OEMs for Service and Repair Capabilities, and Maintenance and Service Costs (%), 2014/15
Table 10: Preference for Service Contracts (%), 2014/15
Table 11: Preference for Service Contracts by Company Size (%), 2014/15
Table 12: Preferences for Service Contracts by Region (%), 2014/15
Table 13: Preferences for Service Contracts by Commodity (%), 2014/15

1.2 List of Figures
Figure 1: Types of Company Used for Parts by Category (%), 2014/15
Figure 2: Use of Independent Third-Parties and Mix of OEMs and Third Parties by Mine Type (%), 2014/15
Figure 3: Use of Third Parties and Mix of OEMs/Third Parties by Company Size (%), 2014/15
Figure 4: Use of Third Parties and Mix of OEMs/Third Parties by Commodity Group (%), 2014/15
Figure 5: Use of Third Parties and Mix of OEMs/Third Parties by Region (%), 2014/15
Figure 6: Use of Third Parties and Mix of OEMs/Third-Parties by Region and Commodity (%), 2014/15
Figure 7: Use of Third Parties and Mix of OEMs/Third-Parties by Region and by Company Earning Below US$100 million (%), 2014/15
Figure 8: After-Sales Equipment Support Preference (%), 2014/15
Figure 9: Preferences for After-Sales Support by Mine Type and Company Size (%), 2014/15
Figure 10: Preferences for After-Sales Support by Commodity (%), 2014/15
Figure 11: Preferences for After-Sales Support by Region (%), 2014/15
Figure 12: Preferences for After-Sales Support by Region and Company Size (%), 2014/15
Figure 13: Average Rating of Importance and Performance of OEMs for Service and Repair Capabilities, 2014/15
Figure 14: Average Ratings of Importance and Performance of OEMs for Maintenance and Service Costs, 2014/15
Figure 15: Preference for Service Contracts (%), 2014/15
Figure 16: Preferences for Service Contracts by Mine Type (%), 2014/15
Figure 17: Preference for Service Contracts by Company Size (%), 2014/15
Figure 18: Preferences for Service Contracts by Region (%), 2014/15
Figure 19: Preferences for Service Contracts by Commodity (%), 2014/15
Figure 20: Respondent Countries, 2014/15
Figure 21: Survey Respondents by Region (%), 2014/15
Figure 22: Survey Respondents by Mine Type (%), 2014/15
Figure 23: Survey Respondents by Commodity (%), 2014/15
Figure 24: Equipment Supplied by Respondents' Major Equipment Supplier by Type (%), 2014/15

View This Report »

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 24 Million searchable statistics with tables, figures & datasets
  • More than 10,000 trusted sources
24/7 Customer Support

Talk to Amrita

+1 718 303 2019

Purchase Reports From Reputable Market Research Publishers
World DC Generator and Motor Market to 2021 - Market Size, Development, and Forecasts

World DC Generator and Motor Market to 2021 - Market Size, Development, and Forecasts

  • $ 26587
  • Industry report
  • January 2017
  • by Global Research & Data Services

The expansion of the global DC generator and motor industry is forecast to reach 0.6% p.a. in the coming years. Between 2010 and 2016 the market increased with an average annual growth of 6.1%. Currently, ...

Thermometer Markets in the World to 2020 - Market Size, Development, and Forecasts

Thermometer Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 21799
  • Industry report
  • November 2016
  • by Global Research & Data Services

The expansion of the global thermometer industry is forecast to reach 7.5% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 7.8%. Currently, liquid-filled ...

Gold Markets in the World to 2020 - Market Size, Development, and Forecasts

Gold Markets in the World to 2020 - Market Size, Development, and Forecasts

  • $ 20469
  • Industry report
  • September 2016
  • by Global Research & Data Services

The expansion of the global gold industry is forecast to reach 5.0% p.a. in the coming years. Between 2009 and 2015 the market increased with an average annual growth of 4.0%. Currently, unwrought gold ...


ref:plp2015

Reportlinker.com © Copyright 2017. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.