1. Market Research
  2. > Manufacturing Market Trends
  3. > 3D Printing Market Analysis By Application (Automotive, Aerospace, Aerospace, Medical), By Raw Material (Polymers, Metals, Ceramic) And Segment Forecasts To 2020

The global market for 3D printing was estimated to be USD 2,183 million in 2012, and is expected to reach USD 8,675.7 million by 2020. The ability to facilitate low-volume manufacturing in a cost-effective manner is expected to fuel the market over the next few years. Further, the report analyzes that the growing need for flexible and customized products is expected to positively impact demand for 3D printing.

Automotive and healthcare industries in particular, are estimated to be key growth areas for revenue generation. Automotive is expected to be the largest and fastest growing application, with an estimated CAGR of 19.6% from 2013 to 2020. The market for medical applications was valued at USD 397.2 million in 2012, with dental applications expected to contribute largely to this segment. Concerns over protection of intellectual property from products manufactured using 3D printing are expected to restrain the industry from reaching its target potential. Backward integration in the value chain in terms of acquisitions of software 3D designing participants has been analyzed to be an opportunity for gaining competitive advantage.

Further Key findings from the study suggest:

North America led the market, with approximately 42% of the overall market share in 2012
Europe is expected to grow at the highest CAGR of 20.4% from 2013 to 2020, which can primarily be attributed to increase in funding from regulatory bodies. Furthermore, increasing investment in research and development are expected to be favorable factors for market expansion in this region
In terms of raw material used for manufacturing, polymers are expected to dominate the market, and accounted for more than 35% of the overall revenue in 2012
The industry is moderately consolidated, with mergers and acquisitions emerging as the key growth strategy. Major industry participants include Stratasys Inc., 3D Systems Corporation, Envisiontec GmbH, and Materialise NV among others.

Grand View Research’s report estimates the market in terms of revenue (USD Million) and segments it as follows:
3D Printing Application Outlook:
Automotive
Aerospace
Consumer Products
Medical
Others
3D Printing Raw Material Outlook:
Polymers
Metals
Ceramic
Others
3D Printing Regional Outlook:
North America
Europe
Asia Pacific
Rest of the World (RoW)

Table Of Contents

3D Printing Market Analysis By Application (Automotive, Aerospace, Aerospace, Medical), By Raw Material (Polymers, Metals, Ceramic) And Segment Forecasts To 2020
Table of Contents

Chapter 1 Executive Summary

Chapter 2 3D Printing Industry Analysis

2.1 3D Printing Market Segmentation

2.2 Market Size and Growth Prospects

2.3 3D Printing Market Dynamics

2.4 Key Opportunities Prioritized

2.5 Industry Analysis - Porter's

2.6 3D Printing Company Market Share Analysis, 2012

2.7 3D Printing PESTEL Analysis, 2012

Chapter 3 3D Printing Application Analysis

3.1 Automotive

3.2 Aerospace

3.3 Consumer Products

3.4 Medical

3.5 Others

Chapter 4 3D Printing Raw Material Analysis

4.1 Polymers

4.2 Metals

4.3 Ceramics

4.4 Others

Chapter 5 3D Printing Regional Analysis

5.1 North America

5.2 Europe

5.3 Asia Pacific

5.4 RoW

Chapter 6 3D Printing Competitive Landscape

6.1 3D Systems Corporation

6.1.1 Company Overview

6.1.2 Financial Performance

6.1.3 Product Benchmarking

6.1.4 Strategic Initiatives

6.2 Arcam AB

6.2.1 Company Overview

6.2.2 Financial Performance

6.2.3 Product Benchmarking

6.2.4 Strategic Initiatives

6.3 Autodesk, Inc.

6.3.1 Company Overview

6.3.2 Financial Performance

6.3.3 Product Benchmarking

6.3.4 Strategic Initiatives

6.4 Concept Laser GmbH

6.4.1 Company Overview

6.4.2 Financial Performance

6.4.3 Product Benchmarking

6.4.4 Strategic Initiatives

6.5 Delcam

6.5.1 Company Overview

6.5.2 Financial Performance

6.5.3 Product Benchmarking

6.5.4 Strategic Initiatives

6.6 EnvisionTEC GmbH

6.6.1 Company Overview

6.6.2 Financial Performance

6.6.3 Product Benchmarking

6.6.4 Strategic Initiatives

6.7 EOS GmbH Electro Optical Systems

6.7.1 Company Overview

6.7.2 Financial Performance

6.7.3 Product Benchmarking

6.7.4 Strategic Initiatives

6.8 MakerBot Industries

6.8.1 Company Overview

6.8.2 Financial Performance

6.8.3 Product Benchmarking

6.8.4 Strategic Initiatives

6.9 Materialise NV

6.9.1 Company Overview

6.9.2 Financial Performance

6.9.3 Product Benchmarking

6.9.4 Strategic Initiatives

6.10 Nanoscribe GmbH

6.10.1 Company Overview

6.10.2 Financial Performance

6.10.3 Product Benchmarking

6.10.4 Strategic Initiatives

6.11 Sculpteo

6.11.1 Company Overview

6.11.2 Financial Performance

6.11.3 Product Benchmarking

6.11.4 Strategic Initiatives

6.12 SLM Solutions GmbH

6.12.1 Company Overview

6.12.2 Financial Performance

6.12.3 Product Benchmarking

6.12.4 Strategic Initiatives

6.13 Stratasys Ltd.

6.13.1 Company Overview

6.13.2 Financial Performance

6.13.3 Product Benchmarking

6.13.4 Strategic Initiatives

6.14 The ExOne Company

6.14.1 Company Overview

6.14.2 Financial Performance

6.14.3 Product Benchmarking

6.14.4 Strategic Initiatives

6.15 Voxeljet AG

6.15.1 Company Overview

6.15.2 Financial Performance

6.15.3 Product Benchmarking

6.15.4 Strategic Initiatives

Chapter 7 Methodology and Scope

7.1 Research Methodology

7.2 Research Scope and Assumption

7.3 List of Data Sources

Companies analyzed in competitive landscape

1) Stratasys Ltd.

2) 3D Systems Corporation

3) The ExOne Company

4) Voxeljet AG

5) EnvisionTEC GmbH

6) EOS GmbH Electro Optical Systems

7) Materialise NV

8) Arcam AB

9) Concept Laser GmbH

10) SLM Solutions GmbH

11) Nanoscribe GmbH

12) MakerBot Industries

13) Autodesk, Inc.

14) Sculpteo

15) Delcam


List of Tables

Global 3D Printing Market (Revenue), 2012 - 2020
Global 3D printing market revenue by region, (USD Million), 2012 - 2020
Global 3D printing market revenue by raw material, (USD Million), 2012 - 2020
Global 3D printing market revenue by application, (USD Million), 2012 - 2020
3D printing market for automotive applications, (Revenue), 2012 - 2020
3D printing market for automotive applications by region, (Revenue), 2012 - 2020
3D printing market for aerospace applications, (Revenue), 2012 - 2020
3D printing market for aerospace applications by region, (Revenue), 2012 - 2020
3D printing market for consumer applications, (Revenue), 2012 - 2020
3D printing market for consumer applications by region, (Revenue), 2012 - 2020
3D printing market for medical applications, (Revenue), 2012 - 2020
3D printing market for medical applications by region, (Revenue), 2012 - 2020
3D printing market for other applications, (Revenue), 2012 - 2020
3D printing market for other applications by region, (Revenue), 2012 - 2020
3D printing market for polymers, (Revenue), 2012 - 2020
3D printing market for polymers by region, (Revenue), 2012 - 2020
3D printing market for metals, (Revenue), 2012 - 2020
3D printing market for metals by region, (Revenue), 2012 - 2020
3D printing market for ceramics, (Revenue), 2012 - 2020
3D printing market for ceramics by region, (Revenue), 2012 - 2020
3D printing market for other raw materials, (Revenue), 2012 - 2020
3D printing market for other raw materials by region, (Revenue), 2012 - 2020
North America 3D printing market, by application, (USD Million), 2012 - 2020
North America 3D printing market, by raw material, (USD Million), 2012 - 2020
Europe 3D printing market, by application, (USD Million), 2012 - 2020
Europe 3D printing market, by raw material, (USD Million), 2012 - 2020
Asia Pacific 3D printing market, by application, (USD Million), 2012 - 2020
Asia Pacific 3D printing market, by raw material, (USD Million), 2012 - 2020
RoW 3D printing market, by application, (USD Million), 2012 - 2020
RoW 3D printing market, by raw material, (USD Million), 2012 - 2020
Global 3D printing market - Competitive landscape

List of Figures

3D Printing - Industry Summary and Critical Success Factors (CSFs)
3D Printing Market Segmentation
Global 3D Printing Market (Revenue), 2012 - 2020
3D Printing Value Chain Analysis
3D Printing Market Dynamics
Key Opportunities Prioritized
Industry Analysis - Porter's
3D Printing Company Market Share Analysis, 2012
3D Printing PESTEL Analysis, 2012
3D printing revenue share by application, 2012 and 2020
3D printing market for automotive applications, (Revenue), 2012 - 2020
3D printing market for aerospace applications, (Revenue), 2012 - 2020
3D printing market for consumer applications, (Revenue), 2012 - 2020
3D printing market for medical applications, (Revenue), 2012 - 2020
3D printing market for other applications, (Revenue), 2012 - 2020
3D printing revenue share by raw material, 2012 and 2020
3D printing market for polymers, (Revenue), 2012 - 2020
3D printing market for metals, (Revenue), 2012 - 2020
3D printing market for ceramics, (Revenue), 2012 - 2020
3D printing market for other raw materials, (Revenue), 2012 - 2020
3D Printing revenue share by region, 2012 and 2020
North America 3D printing revenue, by application, 2012
North America 3D printing revenue, by raw material, 2012
Europe 3D printing revenue, by application, 2012
Europe 3D printing revenue, by raw material, 2012
Asia Pacific 3D printing revenue, by application, 2012
Asia Pacific3D printing revenue, by raw material, 2012
RoW 3D printing revenue, by application, 2012
RoW 3D printing revenue, by raw material, 2012
Research methodology
Research scope and assumptions
Disclaimer

View This Report »

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 24 Million searchable statistics with tables, figures & datasets
  • More than 10,000 trusted sources
24/7 Customer Support

Talk to Ahmad

+1 718 618 4302

Purchase Reports From Reputable Market Research Publishers
3D Printing Ceramics Market by Type, Form, End User - Global Forecast to 2021

3D Printing Ceramics Market by Type, Form, End User - Global Forecast to 2021

  • $ 5650
  • Industry report
  • September 2016
  • by MarketsandMarkets

“End-user segment is one of the driving factors, as 3D printing ceramics are widely used in high-thermal applications” The global 3D printing ceramics market is expected to grow at a CAGR of 29.6% ...

Rapid Prototyping Materials Market by Type, Form, Function, End User - Global Forecast to 2021

Rapid Prototyping Materials Market by Type, Form, Function, End User - Global Forecast to 2021

  • $ 5650
  • Industry report
  • August 2016
  • by MarketsandMarkets

“The rapid prototyping materials market is projected to grow at a CAGR of 26.8% from 2016 to 2021” The rapid prototyping materials market is expected to reach USD 903.8 million by 2021, at a CAGR of ...

3D Printing Software Markets 2016: A Ten Year Forecast And Opportunity Analysis

3D Printing Software Markets 2016: A Ten Year Forecast And Opportunity Analysis

  • $ 4995
  • Industry report
  • October 2016
  • by SmarTech

The 3D printing industry has been riding a historic growth wave since 2012, but today in 2016 the landscape for opportunities is continuing to evolve. With significantly increased competitiveness causing ...


ref:plp2016

Reportlinker.com © Copyright 2016. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.