1. Market Research
  2. > Manufacturing
  3. > Electronics Market Trends
The 2019-2024 Outlook for Commercial and Institutional Electric Lighting Fixtures, Parts, and Accessories in the United States

The 2019-2024 Outlook for Commercial and Institutional Electric Lighting Fixtures, Parts, and Accessories in the United States

  • June 2018
  • 607 pages
  • ID: 5451389

Summary

Table of Contents

This study covers the latent demand outlook for commercial and institutional electric lighting fixtures, parts, and accessories across the states and cities of the United States. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 12,600 cities in the United States.

For each city in question, the percent share the city is of its state and of the United States as a whole is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-à-vis others.

This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each state and city, latent demand estimates are created for commercial and institutional electric lighting fixtures, parts, and accessories. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all cities in the United States). This study gives, however, my estimates for the latent demand, or potential industry earnings (P.I.E.), for commercial and institutional electric lighting fixtures, parts, and accessories in the United States. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of the United States. For each state, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Another reason why sales do not equate to latent demand is exchange rates. In this report, all figures assume the long-run efficiency of currency markets.

Figures, therefore, equate values based on purchasing power parities across geographies. Short-run distortions in the value of the dollar, therefore, do not figure into the estimates. Purchasing power parity estimates were collected from official sources, and extrapolated using standard econometric models. The report uses the dollar as the currency of comparison, but not as a measure of transaction volume. The units used in this report are: US $ mln.

1.3 THE METHODOLOGY
In order to estimate the latent demand for commercial and institutional electric lighting fixtures, parts, and accessories across the states and cities of the United States, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created.

In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions.

Latent demand functions relate the income of a state, city, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium is realized.

For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question.

Ignoring, for the moment, exogenous shocks and variations in utility across geographies, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem.

In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function.

He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume.

This type of consumption function is shown as "B" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data). This type of consumption function is show as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant. For a general overview of this subject area, see Principles of Macroeconomics by N. Gregory Mankiw, South-Western College Publishing; ISBN: 0030340594; 2nd edition (February 2002).

Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles.

In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households with no income eventually have no consumption (wealth is depleted).

While the debate surrounding beliefs about how income and consumption are related is interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for commercial and institutional electric lighting fixtures, parts, and accessories across the states and cities of the United States.

The smallest cities have few inhabitants. I assume that all of these cities fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these states having wealth; current income dominates the latent demand for commercial and institutional electric lighting fixtures, parts, and accessories. So, latent demand in the long-run has a zero intercept. However, I allow different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences).

Given this overriding philosophy, I will now describe the methodology used to create the latent demand estimates for commercial and institutional electric lighting fixtures, parts, and accessories. Since ICON Group has asked me to apply this methodology to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories and geographic locations, not just commercial and institutional electric lighting fixtures, parts, and accessories in the United States.

1.3.1 STEP 1. PRODUCT DEFINITION AND DATA COLLECTION
Any study of latent demand requires that some standard be established to define "efficiently served". Having implemented various alternatives and matched these with market outcomes, I have found that the optimal approach is to assume that certain key indicators are more likely to reflect efficiency than others.

These indicators are given greater weight than others in the estimation of latent demand compared to others for which no known data are available. Of the many alternatives, I have found the assumption that the highest aggregate income and highest income-per-capita markets reflect the best standards for "efficiency".

High aggregate income alone is not sufficient (i.e. some cities have high aggregate income, but low income per capita and cannot be assumed to be efficient). Aggregate income can be operationalized in a number of ways, including gross domestic product (for industrial categories), or total disposable income (for household categories; population times average income per capita, or number of households times average household income).

Latent demand is therefore estimated using data collected for relatively efficient markets from independent data sources (e.g. Euromonitor, Mintel, Thomson Financial Services, the U.S. Industrial Outlook, the World Resources Institute, the Organization for Economic Cooperation and Development, various agencies from the United Nations, industry trade associations, the International Monetary Fund, and the World Bank). Depending on original data sources used, the definition of commercial and institutional electric lighting fixtures, parts, and accessories is established. In the case of this report, the data were reported at the aggregate level, with no further breakdown or definition. In other words, any potential products and/or services that might be incorporated within commercial and institutional electric lighting fixtures, parts, and accessories fall under this category. Public sources rarely report data at the disaggregated level in order to protect private information from individual firms that might dominate a specific product-market. These sources will therefore aggregate across components of a category and report only the aggregate to the public. While private data are certainly available, this report only relies on public data at the aggregate level without reliance on the summation of various category components. In other words, this report does not aggregate a number of components to arrive at the "whole". Rather, it starts with the "whole", and estimates the whole for all states and cities in the United States (without needing to know the specific parts that went into the whole in the first place).

Given this caveat, this study covers commercial and institutional electric lighting fixtures, parts, and accessories as defined by the North American Industrial Classification system or NAICS (pronounced "nakes").

The NAICS code for commercial and institutional electric lighting fixtures, parts, and accessories is 3351221. It is for this definition that aggregate latent demand estimates are derived.

Commercial and institutional electric lighting fixtures, parts, and accessories is specifically defined as follows:
3351221 COMMERCIAL AND INSTITUTIONAL-TYPE ELECTRIC LIGHTING FIXTURES, INCLUDING PARTS AND ACCESSORIES

33512210 Commercial and institutional~type electric lighting fixtures, including parts and accessories

3351221000 Commercial and institutional~type electric lighting fixtures, including parts and accessories

33512211 Commercial and institutional-type electric lighting fixtures, including parts and accessories

3351221100 Commercial and institutional-type electric lighting fixtures, including parts and accessories

3351221102 Commercial and institutional surface or pendant incandescent utilitarian and ornamental lighting fixtures

3351221104 Commercial and institutional recessed IC (direct contact with ceiling insulation) incandescent utilitarian and ornamental lighting fixtures

3351221106 Commercial and institutional recessed non~IC (3~inch minimum clearance from ceiling insulation) incandescent utilitarian and ornamental lighting fixtures

3351221108 Commercial and institutional single circuit track lighting lengths and accessories

3351221111 Commercial and institutional multiple circuit track lighting lengths and accessories

3351221112 Commercial and institutional track lighting line voltage heads

3351221114 Commercial and institutional track lighting low voltage heads

3351221116 Commercial and institutional track lighting lengths and heads sold together (kits)

3351221118 Commercial and institutional specialized custom track lighting, including fixtures, chandeliers, and church lighting

3351221121 Other commercial and institutional incandescent lighting fixtures, including interior display and PAR lampholders

33512212 Commercial and institutional high intensity discharge lighting fixtures

3351221222 Commercial and institutional surface or pendant high intensity discharge lighting fixtures

3351221224 Commercial and institutional indirect high intensity discharge lighting fixtures

3351221226 Commercial and institutional open reflector recessed non~IC (3~inch minimum clearance from ceiling insulation) high intensity discharge lighting fixtures

3351221228 Commercial and institutional enclosed recessed non~IC (3~inch minimum clearance from ceiling insulation) high intensity discharge lighting fixtures

3351221231 Commercial and institutional open reflector recessed IC (direct contact with ceiling insulation) high intensity discharge lighting fixtures

3351221232 Commercial and institutional enclosed recessed IC (direct contact with ceiling insulation) high intensity discharge lighting fixtures

33512213 Commercial and institutional fluorescent recessed troffers, air handling lighting fixtures

3351221333 Commercial and institutional lensed 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221334 Commercial and institutional lensed 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221335 Commercial and institutional lensed 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221336 All other commercial and institutional lensed, fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221337 Commercial and institutional metal louvered 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221338 Commercial and institutional metal louvered 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221339 Commercial and institutional metal louvered 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221340 All other commercial and institutional metal louvered, fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221341 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221342 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221343 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

3351221344 All other commercial and institutional nonmetal louvered, fluorescent recessed troffers, air handling fixtures (including heat extraction versions)

33512214 Commercial and institutional fluorescent recessed troffers, nonair handling lighting fixtures

3351221401 Commercial and institutional lensed 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221402 Commercial and institutional lensed 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221403 Commercial and institutional lensed 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221404 All other commercial and institutional lensed, nonair handling fluorescent recessed troffer fixtures (including heat extraction versions)

3351221405 Commercial and institutional metal louvered 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221406 Commercial and institutional metal louvered 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221407 Commercial and institutional metal louvered 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221408 All other commercial and institutional metal louvered nonair handling fluorescent recessed troffer fixtures (including heat extraction versions)

3351221409 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 4 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221411 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 3 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221412 Commercial and institutional nonmetal louvered 2 feet by 4 feet, 2 lamp fluorescent recessed troffers, nonair handling fixtures (including heat extraction versions)

3351221413 All other commercial and institutional nonmetal louvered nonair handling fluorescent recessed troffer fixtures (including heat extraction versions)

33512215 Commercial and institutional fluorescent surface and recessed striplights

3351221546 Commercial and institutional fluorescent surface striplights

3351221548 Commercial and institutional fluorescent recessed striplights

33512216 Commercial and institutional fluorescent plastic wraparounds

3351221601 Commercial and institutional 4 foot, 2 lamp fluorescent plastic wraparounds

3351221602 Commercial and institutional 4 foot, 4 lamp fluorescent plastic wraparounds

3351221603 All other commercial and institutional fluorescent plastic wraparounds

33512217 Other fluorescent commercial and institutional fixtures and specific function lighting of all types

3351221751 Commercial and institutional fluorescent ceiling systems (including luminous ceilings)

3351221754 Commercial and institutional wall mounted fluorescent lighting fixtures

3351221756 Commercial and institutional under cabinet mount task fluorescent lighting fixtures

3351221758 All other commercial and institutional lensed surface and pendant lighting fixtures

3351221761 All other commercial and institutional louvered surface and pendant lighting fixtures

3351221762 Commercial and institutional recessed IC (direct contact with ceiling insulation) compact fluorescent downlights

3351221764 Commercial and institutional recessed non~IC (3~inch minimum clearance from ceiling insulation) compact fluorescent downlights

3351221766 Commercial and institutional enclosed and gasketed incandescent high intensity discharge and fluorescent (clean room) lighting fixtures

3351221768 Commercial and institutional indirect incandescent high intensity discharge and fluorescent furniture mount lighting fixtures

3351221771 Commercial and institutional indirect incandescent high intensity discharge and fluorescent pendant mount lighting fixtures

3351221772 Commercial and institutional indoor incandescent high intensity discharge and fluorescent signs, including electro~luminescence (exit, directional, etc.)

3351221774 Commercial and institutional indoor emergency incandescent high intensity discharge and fluorescent lighting fixtures (automatic self~powered)

3351221776 Commercial and institutional vandal resistant incandescent high intensity discharge and fluorescent lighting fixtures (specialty products designed for this application)

3351221778 All other commercial and institutional specific function incandescent, high intensity discharge and fluorescent lighting fixtures

33512218 Components and renewal parts for commercial and institutional lighting fixtures sold separately

3351221881 Components and renewal parts for commercial and institutional lighting fixtures sold separately

This report was prepared from a variety of sources including excerpts from documents and official reports or databases published by the World Bank, the U.S. Department of Commerce, the U.S. State Department, various national agencies, the International Monetary Fund, the Central Intelligence Agency, various agencies from the United Nations (e.g. ILO, ITU, UNDP, etc.), and non-governmental sources, including ICON Group Ltd., Euromonitor, the World Resources Institute, Mintel, the U.S. Industrial Outlook, and various public sources cited in the trade press.

1.3.2 STEP 2. FILTERING AND SMOOTHING
Based on the aggregate view of commercial and institutional electric lighting fixtures, parts, and accessories as defined above, data were then collected for as many geographic locations as possible for that same definition, at the same level of the value chain. This generates a convenience sample of indicators from which comparable figures are available.

If the series in question do not reflect the same accounting period, then adjustments are made. In order to eliminate short-term effects of business cycles, the series are smoothed using a 2-year moving average weighting scheme (longer weighting schemes do not substantially change the results).

If data are available for a geographic region, but these reflect short-run aberrations due to exogenous shocks (such as would be the case of beef sales in a state or city stricken with foot and mouth disease), these observations were dropped or "filtered" from the analysis.

1.3.3 STEP 3. FILLING IN MISSING VALUES
In some cases, data are available on a sporadic basis. In other cases, data may be available for only one year.

From a Bayesian perspective, these observations should be given greatest weight in estimating missing years. Assuming that other factors are held constant, the missing years are extrapolated using changes and growth in aggregate national, state, and city-level income.

Based on the overriding philosophy of a long-run consumption function (defined earlier), states and cities which have missing data for any given year, are estimated based on historical dynamics of aggregate income for that geographic entity.

1.3.4 STEP 4. VARYING PARAMETER, NON-LINEAR ESTIMATION
Given the data available from the first three steps, the latent demand is estimated using a "varying-parameter crosssectionally pooled time series model". The interested reader can find longer discussions of this type of modeling in Studies in Global Econometrics (Advanced Studies in Theoretical and Applied Econometrics V. 30) , by Henri Theil, et al., Kluwer Academic Publishers; ISBN: 0792336607; (June 1996), and in Principles of Econometrics, by Henri Theil John Wiley & Sons; ISBN: 0471858455; (December 1971), and in Econometric Models and Economic Forecasts by Robert S. Pindyck, Daniel L. Rubinfeld McGraw Hill Text; ISBN: 0070500983; 3rd edition (December 1991). Simply stated, the effect of income on latent demand is assumed to be constant unless there is empirical evidence to suggest that this effect varies (i.e., the slope of the income effect is not necessarily same for all states or cities). This assumption applies along the aggregate consumption function, but also over time (i.e., not all states or cities in the United States are perceived to have the same income growth prospects over time). Another way of looking at this is to say that latent demand for commercial and institutional electric lighting fixtures, parts, and accessories is more likely to be similar across states or cities that have similar characteristics in terms of economic development.

This approach is useful across geographic regions for which some notion of non-linearity exists in the aggregate cross-region consumption function. For some categories, however, the reader must realize that the numbers will reflect a state’s or city’s contribution to latent demand in the United States and may never be realized in the form of local sales.

1.3.5 STEP 5. FIXED-PARAMETER LINEAR ESTIMATION
Nonlinearities are assumed in cases where filtered data exist along the aggregate consumption function. Because the the United States consists of more than 15,000 cities, there will always be those cities, especially toward the bottom of the consumption function, where non-linear estimation is simply not possible.

For these cities, equilibrium latent demand is assumed to be perfectly parametric and not a function of wealth (i.e., a city’s stock of income), but a function of current income (a city’s flow of income). In the long run, if a state has no current income, the latent demand for commercial and institutional electric lighting fixtures, parts, and accessories is assumed to approach zero. The assumption is that wealth stocks fall rapidly to zero if flow income falls to zero (i.e., cities which earn low levels of income will not use their savings, in the long run, to demand commercial and institutional electric lighting fixtures, parts, and accessories). In a graphical sense, for low-income cities, latent demand approaches zero in a parametric linear fashion with a zero-zero intercept. In this stage of the estimation procedure, a low-income city is assumed to have a latent demand proportional to its income, based on the cities closest to it on the aggregate consumption function.

1.3.6 STEP 6. AGGREGATION AND BENCHMARKING
Based on the models described above, latent demand figures are estimated for all major cities in the United States. These are then aggregated to get state totals.

This report considers a city as a part of the regional and national market. The purpose is to understand the density of demand within a state and the extent to which a city might be used as a point of distribution within its state.

From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas.

This influence varies from one industry to another, but also from one period of time to another. I allocate latent demand across areas of dominant influence based on the relative economic importance of cities within its state. Not all cities (e.g. the smaller towns) are estimated within each state as demand may be allocated to adjacent areas of influence. Since some cities have higher economic wealth than others within the same state, a city’s population is not generally used to allocate latent demand. Rather, the level of economic activity of the city vis-à-vis others is used. Figures are rounded, so minor inconsistencies may exist across tables.

Get Industry Insights. Simply.

  • Latest reports & slideshows with insights from top research analysts
  • 150+ Million searchable statistics with tables, figures & datasets
  • More than 25,000 trusted sources
  • Single User License — provides access to the report by one individual.
  • Department License — allows you to share the report with up to 5 users
  • Site License — allows the report to be shared amongst all employees in a defined country
  • Corporate License — allows for complete access, globally.
Ahmad helps you find the right report:
Testimonials

The research specialist advised us on the best content for our needs and provided a great report and follow-up, thanks very much we shall look at ReportLinker in the future.

Kate Merrick

Global Marketing Manager at
Eurotherm by Schneider Electric

We were impressed with the support that ReportLinker’s research specialists’ team provided. The report we purchased was useful and provided exactly what we want.

Category Manager at
Ikea

ReportLinker gave access to reliable and useful data while avoiding dispersing resources and spending too much time on unnecessary research.

Executive Director at
PwC Advisory

The customer service was fast, responsive, and 100% professional in all my dealings (...) If we have more research needs, I'll certainly prioritize working with ReportLinker!

Scott Griffith

Vice President Marketing at
Maurice Sporting Goods

The research specialist provided prompt, helpful instructions for accessing ReportLinker's product. He also followed up to make sure everything went smoothly and to ensure an easy transition to the next stage of my research

Jessica P Huffman

Research Associate at
American Transportation Research Institute

Excellent customer service. Very responsive and fast.

Director, Corporate Strategy at
Ingredion

I reached out to ReportLinker for a detailed market study on the Air Treatment industry. The quality of the report, the research specialist’s willingness to solve my queries exceeded my expectations. I would definitely recommend ReportLinker for in-depth industry information.

Mariana Mendoza

Global Platform Senior Manager at
Whirlpool Corporation

Thanks! I like what you've provided and will certainly come back if I need to do further research works.

Bee Hin Png

CEO at
LDR Pte Ltd

The research specialist advised us on the best content for our needs and provided a great report and follow-up, thanks very much we shall look at ReportLinker in the future.

Kate Merrick

Global Marketing Manager at
Eurotherm by Schneider Electric

FAQ
  • How we can help
    • I am not sure if the report I am interested in will fulfill my needs. Can you help me?
    • Yes, of course. You can call us at +33(0) 4 37 65 17 03 or drop us an email at researchadvisor@reportlinker.com to let us know more about your requirements.
    • We buy reports often - can ReportLinker get me any benefits?
    • Yes. Set up a call with a Senior Research Advisor to learn more - researchadvisor@reportlinker.com or +33(0) 4 37 65 17 03.
    • I have had negative experiences with market research reports before. How can you avoid this from happening again?
    • We advise all clients to read the TOC and Summary and list your questions so that we can get more insight for you before you make any purchase decision. A research advisor will accompany you so that you can compare samples and reports from different sources, and choose the study that is right for you.

  • Report Delivery
    • How and when I will receive my Report?
    • Most reports are delivered right away in a pdf format, while others are accessed via a secure link and access codes. Do note that sometimes reports are sent within a 12 hour period, depending on the time zones. However, you can contact us to escalate this. Should you need a hard copy, you can check if this option is offered for the particular report, and pay the related fees.
  • Payment conditions
    • What payment methods do you accept?
      1. Credit card : VISA, American Express, Mastercard, or
      2. You can download an invoice to pay by wire transfer, check, or via a Purchase Order from your company, or
      3. You can pay via a Check made out in US Dollars, Euros, or British Pounds for the full amount made payable to ReportLinker
    • What are ReportLinker’s Payment Terms?
    • All payments must normally be submitted within 30 days. However, you can let us know if you need extended time.
    • Are Taxes and duties included?
    • All companies based in France must pay a 20% tax per report. The same applies to all individuals based in the EU. All EU companies must supply their VAT number when purchasing to avoid this charge.
    • I’m not satisfied. Can I be refunded?
    • No. Once your order has been processed and the publisher has received a notification to send you the report, we cannot issue any refund or cancel any order. As these are not ‘traditional’ products that can be returned, reports that are dispatched are considered to be ‘consumed’.
  • User license
    • The license that you should acquire depends on the number of persons that need to access the report. This can range from Single User (only one person will have the right to read or access the report), or Department License (up to 5 persons), to Site License (a group of persons based in the same company location), or Corporate License (the entire company personnel based worldwide). However, as publishers have different terms and conditions, we can look into this for you.
Purchase Reports From Reputable Market Research Publishers
Global Automotive LED Lighting Market 2018-2022

Automotive LED Lighting Sector: Worldwide Forecast until 2022

  • $ 2500
  • Industry report
  • June 2018
  • by Infiniti Research Limited

About Automotive LED LightingAutomotive light-emitting diode (LED) lighting is a type of automotive lighting technology. In this technology, LED, a two-lead semiconductor light source, that emits light ...

Global Lighting Fixtures and Luminaires Industry

Global Lighting Fixtures and Luminaires Industry

  • $ 5800
  • Industry report
  • May 2018
  • by Global Industry Analysts

This report analyzes the worldwide markets for Lighting Fixtures and Luminaires in US$ by the following Product Segments and End-Use Sectors: Product Segments - Portable, Non-Portable, and Parts and Accessories; ...

Electric Lighting Equipment Manufacturing Market Global Briefing 2018

Electric Lighting Equipment Manufacturing Market Global Briefing 2018

  • $ 1000
  • Industry report
  • January 2018
  • by The Business Research Company

The electric lighting equipment manufacturing market can be classified intoi) Electric Lamp Bulb and Part Manufacturing businesses that manufacture electric bulbs and tubes and their components.ii) Lighting ...


ref:plp2018

Reportlinker.com © Copyright 2018. All rights reserved.

ReportLinker simplifies how Analysts and Decision Makers get industry data for their business.

Make sure you don’t miss any news and follow us on